Plasti Dip® Pure PlastiDip
Instructions
Bringing tools back to life is nothing new for Plasti Dip. Using the Plasti Dip pure.
Grab the tool or rope you wanna dip.
How to Dip:
1. Surface must be clean and dry. For best results, avoid direct sunlight, high humidity or breezy conditions.
2. Stir gently and thoroughly before each use.
3. Attach wire or string to hang item.
4. Insert item 1” every 5 seconds; withdraw at same rate.
5. Recommended 2-3 coats for best results.
6. Allow 30 minutes minimum dry time before use.
MULTI-PURPOSE RUBBER COATING
Plasti Dip is an air-dry, specialty rubber coating. In fact, it’s the original peelable, flexible, insulating, non-slip, durable rubber coating. The Plasti Dip product line provides a wide range of coating solutions from automotive customization to home improvement.
ATTRIBUTES OF PLASTI DIP®
-
Protects coated items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip
-
Peelable and removable off of most surfaces
-
Remains flexible and stretchy over time
-
Will not crack or become brittle in extreme weather conditions
-
Proven in temperatures from -30°F to 200°F
-
Easy to use application
​
How we make the junior Plasti Dip pure
Here at UKPlastDip we buy in bulk, so we can pass the savings on.
For the 250 and 400ml sizes we use a 500ml tin (they're actually 550ml tins). So the 250ml will be physically just under 1/2 a tin. The 400ml will be just under 3/4 full.
The 750ml is in a 1 litre tin (1.1 litre capacity) so this will be just under the 3/4 full.
The 2.5 litre is in a 2.5 litre (2.6 litre capacity) and the 5 litre in a 5 litre tub (5.5 litre tub)
​
We physically decant into these tins from 5 and 50 gallon drums direct from PlastiDip USA. We will make a video of this soon. Easier to show than explain!